In certain scenarios where tapping power from a panel is not possible, a system can be powered via a wall outlet. If you are powering your system this way, please be sure
to consult your customer service representative.

To tap power via a wall outlet, follow the installation instructions for Option 2: Tapping a wall outlet in this instruction document.

Once you have completed your installation, proceed to setup the system by connecting to the emitted hotspot and by navigating to

Step 1.  When you get to this step, please select the color options as below

2.  When you get to the picture for assigning the color for each circuit please make sure to pick the same color for "B" the orange color.

For more help, please reach out to us at

Did this answer your question?