Prerequisites
Active Verdigris Analytics subscription
EV2 gateway installed and configured
At least 1 week of baseline data collected
Getting Started in 3 Steps
Step 1: Select Your Measurement Boundary
Navigate to the M&V feature in your dashboard
Click "Select a building" from the dropdown
Choose your measurement boundary:
For whole building (IPMVP C): Select building and click “Apply” (skip panel/breaker selection)
For specific equipment (IPMVP A/B): Select building, Select individual panels/breakers, and click “Apply
💡 Tip: Start with a single system or area to familiarize yourself with the process
Step 2: Define Analysis Periods
Use the date picker to select:
Baseline period (before changes)
Reporting period (after changes)
Ensure each period has:
Minimum 1 weeks of data
Similar operational patterns
Complete data coverage
💡 Tip: Choose baseline periods that represent normal operations
Step 3: Generate & Interpret Results
Click "Run Analysis" to generate your report
Review the generated insights:
Energy consumption comparison
Weather-normalized savings
Financial impact (if utility rate entered)
💡 Tip: Enter your utility rate to see cost savings calculations
Common Uses
Validating retrofit projects
Measuring operational changes
Documenting energy savings
Supporting efficiency programs
Troubleshooting
No Data Available?
Expand your date range
Check panel/breaker selection
Verify data collection status in Verdigris Admin Console (must have
Building AdminorAccount Ownerroles to log in)
Slow Loading?
Normal for large date ranges
Try reducing analysis period
Check your internet connection
Next Steps
Screenshot and share results with stakeholders
Set up regular verification periods
Document baseline conditions
Share feedback with Verdigris
Best Practices Checklist
[ ] Confirm minimum 1 week of baseline data
[ ] Verify correct data selection
[ ] Document any operational changes
[ ] Note seasonal considerations and select multiple baselines and reporting periods, if needed
[ ] Review data quality metrics in Verdigris Admin Console (must have
Building AdminorAccount Ownerroles to log in)
Quick Reference: Navigation
Home → M&V → Select Building → Select Panel(s)/Breaker(s) → Set Start/End Dates → Add Baseline/Reporting Periods → Run Analysis
To learn more or request support, please contact your Customer Success Representative or email support@verdigris.co.