Installation and Setup
Resources to install and set up Verdigris: gateway installation and configuration guides, building administration and common CT chain errors.
16 articles
Installation and Configuration
Install and configure Verdigris data gateways: EV1 and EV2 install guides, manuals, configuration guides, BACnet client setup and CT thresholds.
- Device Notice: Install Updates by Serial NumberInstallation updates by serial number: units above BBE20001560 use 4-wire WYE termination, while BBE20001560 and below stay in delta mode.
- How to Install an EV2 Verdigris Data GatewayWatch the installation training video to learn how to install a Verdigris EV2 Energy Data Gateway, with links to the installation manual PDF and slide deck.
- Energy Data Gateway Installation ManualsDownload the EV2, EV1 and Building Data Gateway installation manuals for the Verdigris Energy Data Gateway, plus installation videos in English and Chinese.
- Configuration Guide (Global)After installing your Verdigris system, use the Verdigris Setup Tools to complete configuration so metered data is transmitted to the cloud.
- Configuration Guide (China)After installation, use the Verdigris Setup Tools to complete configuration so metered data reaches the cloud. This is the China version of the guide.
- How to setup Verdigris as a BACnet Client?How to set up Verdigris as a BACnet client using the Verdigris Mobile App on your smart device while you are near the Verdigris Gateway.
- How to Deconfigure a Data Gateway?How to deconfigure a Verdigris Energy Data Gateway in the Admin Console so you can reuse it on another panel, then reconfigure it with the desired panel.
- How to reactivate a decommissioned Panel?How to reactivate a previously decommissioned panel in the Verdigris Admin Console by contacting your representative or support with the gateway serial number.
- What are the Verdigris CT indicator thresholds?Explains the three CT indicator thresholds on the Configuration page of the Verdigris Admin Console that validate an installed CT is set correctly.
- Verdigris Configuration GuideA click-through guide to digitally set up and configure an installed Verdigris Energy Data Gateway in the Admin Console, starting with adding a new panel.
- How to Install an EV1 Verdigris Data GatewayThis video series explains how to install the Verdigris system on your electrical panel, configure the settings, and troubleshoot issues
- Gateway Extension Cable Policy and SpecificationsThis article addresses common questions and clarifications regarding the inclusion and availability of extension cables for EDG units.
Building Administration
Building administration guides: update a building profile, add new CTs to an installed gateway, and rename a breaker panel or circuit.
- Update your Building ProfileUse this guide to update your building profile settings. These settings help give you more accurate information and recommendations.
- How do I add new CTs to an installed Gateway?Follow this guide to add more CT sensors to a previously installed Verdigris Energy Data Gateway, for example after adding a breaker or load to the panel.
- How to Rename a Breaker Panel or CircuitSteps to rename an existing breaker panel or circuit in the Verdigris Admin Console: select the panel or breaker, edit the name and save.
Common Installation Errors
What not to do when installing Verdigris: commonly seen CT chain installation errors, so you can avoid them and ensure a successful install.
